Tether Tape™

Part of our Instant Tether System™, Tether Tape™ uses advanced self-fusing silicone technology to create a load-rated tether point on a tool in seconds. Due to its design, it doesn't use any adhesive so doesn't leave any residue behind when removing it from the tool.

NLG Tether Tape™ uses advanced self-fusing silicone technology to create load-rated tether points on any tool within seconds. As most tools are not designed with a manufactured attachment point, NLG’s Instant Tether System™ uses Tether Tape™ and D Rings to quickly retrofit tether points, ready for any tool lanyard to connect to.
No heat source or other specialist tools are required to fit Tether Tape™ as it is simply activated by stretching. It fully bonds to itself within 24 hours at room temperature but is tested and certified for immediate use. Because no adhesive is used in the process, the retrofitted tool tether can be easily removed when no longer required, leaving no sticky residue or permanent damage to the tool.

NLG Tether Tape™ features a fibreglass reinforcement mesh for exceptional strength, durability and resistance against tears and punctures.
Pair with a Large D Ring, Small D Ring or Non-Conductive D Ring for common hand tools or use with Tether Choke™ single arm or twin arm when securing power tools and large straight shafted tools. Based on a general selection of hand tools, one roll will tether up to 10 tools on average.
Reduce wastage when the tether point is no longer needed by simply cutting away the Tether Tape™ and retaining the D Ring Tether or Choke™ so that it can be reused on another tool.

The flexibility and speed of the combined Instant Tether System™ make Tether Tape™ the first choice across a broad range of industries. Keep a roll to hand, and a selection of D Rings, and you’ll never be caught out again.

Specification:

• Max Load: 5 KG / 11 LBS
• Safety Standards: ANSI/ISEA 121-2018, CE / UKCA, NS 9611:2022+AC
• Load Tested and Third-party Certified: Dynamic (2:1 Safety Factor)
• Dimensions: 2.8m (L) x 25mm (W)
• Max Lanyard Length: 200 CM / 78 IN

Features:

• Self-fusing stretch activation allows for quick and simple installation
• Adhesive-free design means no sticky residue is left on the tool when removed
• Fibreglass reinforcement mesh, for high strength and durability
• Adds comfortable ergonomic grip to tool handles
• Inherently flame retardant and when burned forms a non-conductive ash
• Effective temperature range: - 50°C to 250°C